Jump to content
  • Welcome to SEFP!

    Welcome!

    Welcome to our community forums, full of great discussions about Structural Engineering. Please register to become a part of our thriving group or login if you are already registered.

Sign in to follow this  
Fatima Khalid

9th International Civil Engineering Conference (ICEC 2017), December 22-23, 2017, Karachi, Pakistan

Recommended Posts

Dear Fellow Researchers, Academicians, and research students,

 

NED University of Engineering & Technology in collaboration with Institution of Engineers Pakistan (IEP) is organizing 9th International Civil Engineering Conference (ICEC 2017) on December 22-23, 2017 at Karachi, Pakistan.

 The congress details are available at its website www.neduet.edu.pk/icec

 Also attached is congress flyer for information and dissemination among your peers.

 Abstracts submission deadline has been extended till October 31, 2017.

 International Civil Engineering Conference (ICEC) is a regular feature in the calendar of events for Institution of engineering Pakistan and its Organizing partner NED University of Engineering and Technology Karachi. It is being organized frequently for almost two decades now. Eight international conferences have been organized in the past. Every year, the ICEC is held under an innovative theme related to contemporary issues that relate Civil Engineering and Socioeconomics of the society.

 The latest version of ICEC was held on December 23-24, 2016 at Karachi. The conference was organized in collaboration with Federation of Engineering Institutions of Islamic Countries (FEIIC), Federation of Engineering Institutions of South and Central Asia (FEISCA) and The Asian Civil Engineering Coordinating Council (ACECC). Theme of this congress was “Ensuring technological advancement through innovation based knowledge corridor” More than 40 international papers were presented at the 2016 conference including those from United States, United Kingdom, Malaysia, Srilanka, Bangladesh, Iran, and Nepal. The event was attended by a number of delegates both from academia and industry that provided a great opportunity for the stakeholders to meet and discuss various issues related to Civil Engineering education, profession and recent advancements.

 This year, the 9th International Civil Engineering Conference (ICEC 2017) will be organized on December 22-23, 2017, under the theme “Striving towards Resilient Built Environment?” The idea is to bring together latest civil engineering knowledge, research and development efforts from scientific community, engineers and practitioners that can help in contributing towards enhancing the resilience of the societies and thus establish a better built environment.

 The conference proceedings are published through blind peer-review procedure. The confetence will cover all areas of civil engineering, including, but not limited to, the following:

 ·          Structural Engineering

·          Construction Project Management

·          Earthquake Engineering & Design

·          Transportation Planning

·          Traffic Simulation and Modeling

·          Disaster Management

·          Geotechnical Engineering

·          Water Resources

·          Environmental Engineering

 

For further details, contact the undersigned.

 Best Regards,

 -------------------------------------------

 

Dr. Farrukh Arif

Co-Convener, ICEC 2017

Assistant Professor,

Department of Civil Engineering,

NED University of Engineering & Technology,

Karachi, Pakistan

farrukharif@gmail.com

Flyer .jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Our picks

    • I am suppose to design a pile foundation for a machine weighing approximately 50 tons and with an operational loading of 100 tons. 
      I ll appreciate your help in terms of guidance & provision of notes...  
       
      Thank you..
      • 36 replies
    • Material behavior can be idealized as consisting of an 'elastic' domain and a 'plastic' domain. For almost 200 years, structural design has been
      based on an elastic theory which assumes that structures display a linear response throughout their loading history, ignoring the post-yielding
      stage of behavior. Current design practice for reinforced concrete structures is a curious blend of elastic analysis to compute forces and moments, plasticity theory to proportion cross-sections for the moment and axial, load, and empirical mumbo-jumbo to proportion members for shear.

       

      From the book "Design of Concrete Structures with Stress Fields" by A. Muttoni,  J. Schwartz and  B.Thurliman.

       
      • 0 replies
    • Dear Fellow Researchers, Academicians, and research students,

       

      NED University of Engineering & Technology in collaboration with Institution of Engineers Pakistan (IEP) is organizing 9th International Civil Engineering Conference (ICEC 2017) on December 22-23, 2017 at Karachi, Pakistan.

       The congress details are available at its website www.neduet.edu.pk/icec

       Also attached is congress flyer for information and dissemination among your peers.

       Abstracts submission deadline has been extended till October 31, 2017.

      Please click on the link to see the full description.
      • 0 replies
    • AoA all,

      Is it mandatory to do column concreting upto the soffit of the beam in a single pour ?

      What code says about the construction/cold joint location in column ?

      Majority of the contractors are pouring the column concrete upto the soffit of the beam (full height of the column), some contractors leave the column height about 9" to 12" below the beam level and then fill this 9" to 12" column height with the beams & slab concreting. On one site column concreting was stopped at the mid height and the remaining half was filled on the next day.

      Thanks

       

       
      • 5 replies
    • AOA 

      i am facing problems in shear wall design .what are the pier and spandral ?what will be the difference when we assign pier or spandral? without assigning these the shear wall design is incomplete .

      i am taking about etabsv16

      someone have document about shear wall design plz provide it 

      thank you

       
      • 9 replies
    • Salam Members,

      Congratulations to Engineers, PEC has become full signatory of Washington Accord, what are the benefits to Pakistani engineers for this agreement. 

       

      Regards   

       

       
      • 3 replies
    • Please clarify the following confusions one by one:-

       

      1. If we run P-delta analysis in ETABS, then should we ignore stiffness property modifiers for beams and columns? I have heard that if we perform P-delta analysis and apply stiffness modifiers at the same time then the moment magnification process is doubled...?

       

      2. ETABS considers selenderness of a column by applying moment magnification factors. If we run P-delta analysis also, does it mean that the selenderness of column is being over-estimated? I mean once the moments are magnified in P-delta analysis process and again through moment magnification process?

       

      Please help me understand the software myth and clarify above confusions.
      • 1 reply
    • Assalam o alaikum.
      According to ACI 12.5.2,
      development length for fc' = 3000, fy=60000, for normal weight concrete and epoxy less reinforcement, The required development length comes out to be
      for #3 = 8.2 inch
      for #4 = 10.95 inch
      for #6 = 16.42 inch
      for #8 = 21.9 inch
       
      And if in my case, ACI 12.5.3 is not fulfilled, it means now i have to provide ldh as mentioned above. ldh is STRAIGHT EMBEDMENT LENGTH + RADIUS OF BEND + ONE BAR DIAMETER as shown in figure attached. Now my question is, if in my case, main reinforcement of beam is of #6 and #4, minimum column size required will be 18 inch and 12 inch respectively. Lets say by any means, i can not select #4, #3 bars and size of column where bars are to be terminated is 12 inch, how to fullfil this development length???
      • 11 replies
    • Dear all,

      I am trying to design shearwalls through ETABS with temperature load applied over shell. At various location, spandral section fails in Shear due to temperature and piers (sometime in shear, mostly in flexure).  (See Attached Image)

      Certainly all the problem in Shearwalls are due to temperature. I don't want to increase cross section of spandral or pier at some location just due to temperature load case as it will appears non-uniform with rest of the wall. 

      I have seen stiffness modifier affect distribution of forces and also rigid/semi rigid daiphragm assumption. 

       

      Can anybody guide how to properly design the shear wall with temperature load applied in ETABS or share any similar experience. Thanks in Advance.    
      • 15 replies
    • ENGINEERS;
      I WILL LOOSE MY BRAIN FROM ETABS. 
      I DECIDED TO MAKE MANUAL MESHING FROM AREA ELEMENTS BESIDE EACH OTHER AND EVERY HING WAS FINE .
      BUT AFTER DEVISION SAY 7*7 ELEMNTS FOR EVERY BIG ELEMENT AND MAKING ETABS CHECH..................THEN 500 ERROR MESSAGE THAT ALL ELEMNTS ARE CLOSE TO EACH OTHER.  WHAT ARE GOING...... SOMEONE TELL ME PLEASE...... I WILL LOST MY WORK
      • 6 replies
  • Recently Browsing   0 members

    No registered users viewing this page.

×

Important Information

By using this site, you agree to our Terms of Use and Guidelines.